15 Fixes: Wi-Fi Connected No Internet Issue In Windows 10

Wi-Fi connected but no internet issue is a common problem faced by Windows 10 users. This occurs when your computer is connected to a Wi-Fi network, but you are unable to access the internet. The issue can be caused by various factors, such as hardware problems, outdated drivers, incorrect settings, or software conflicts.

Overview of 15 Fixes to Address the Problem

This article provides 15 fixes to help you resolve the Wi-Fi connected no internet issue in Windows 10. These fixes range from basic troubleshooting steps to advanced solutions, catering to different skill levels and technical expertise.

1. Basic Troubleshooting Steps

Restart your computer

Restarting your computer can fix a variety of issues, as it clears temporary files, resets hardware components, and addresses minor software glitches. Simply click on the Start button, select the power icon, and choose “Restart” to reboot your system. This should be your first step in attempting to resolve the Wi-Fi connected no internet issue.

Restart your router and modem

Restarting your router and modem can help resolve connectivity issues by resetting the devices and re-establishing the connection with your internet service provider (ISP). Unplug both devices from the power source, wait for 30 seconds, and then plug them back in. Once they are fully rebooted, check if the issue is resolved.

Check for physical Wi-Fi switch on the laptop

Some laptops have a physical switch or button to enable or disable Wi-Fi connectivity. Make sure this switch is set to the “On” position, as it may have been accidentally turned off. Refer to your laptop’s user manual or manufacturer’s website if you’re unsure where the Wi-Fi switch is located.

Verify Wi-Fi is enabled in Windows 10 settings

Ensure that Wi-Fi is enabled in your Windows 10 settings. Click on the network icon in the system tray, located at the bottom right corner of your screen. If the Wi-Fi option is grayed out, click on it to enable Wi-Fi connectivity. If it is already enabled, try disabling it and then enabling it again to reset the connection.

Basic Troubleshooting Steps

2. Network Adapter Fixes

Update your network adapter driver

Outdated or incompatible network adapter drivers can cause the Wi-Fi connected no internet issue. Updating your drivers can help fix this problem.

Automatic update:

To update your network adapter driver automatically, follow these steps:

  • Right-click on the Start button and select “Device Manager.”
  • Expand the “Network adapters” section.
  • Right-click on your Wi-Fi adapter and choose “Update driver.”
  • Select “Search automatically for updated driver software” and follow the on-screen instructions.

Manual update:

If the automatic update doesn’t work, you can download the latest driver from your network adapter manufacturer’s website and install it manually.

  • Identify your network adapter’s make and model.
  • Visit the manufacturer’s website and locate the latest driver.
  • Download and install the driver by following the instructions provided by the manufacturer.

Disable and re-enable the network adapter

Disabling and re-enabling the network adapter can help reset the connection and fix the Wi-Fi connected no internet issue.

  • Open “Device Manager” as described in the previous section.
  • Expand the “Network adapters” section.
  • Right-click on your Wi-Fi adapter and select “Disable device.”
  • Wait for a few seconds, then right-click on the adapter again and choose “Enable device.”

Reset the network adapter Settings

Resetting the network adapter settings can help resolve any configuration issues.

  • Press the Windows key + X and select “Network Connections.”
  • Right-click on your Wi-Fi connection and choose “Properties.”
  • Click on “Configure” and then the “Advanced” tab.
  • Click on “Restore Defaults” or “Reset to Default” and confirm the action.

Uninstall and reinstall the network adapter driver

If updating the driver doesn’t work, try uninstalling and reinstalling it.

  • Open “Device Manager” and expand the “Network adapters” section.
  • Right-click on your Wi-Fi adapter and choose “Uninstall device.”
  • Follow the on-screen instructions to complete the uninstallation.
  • Restart your computer, and Windows 10 will automatically reinstall the driver.
Network Adapter Fixes

3. Network Configuration Fixes

Flush DNS and reset IP settings

Flushing the DNS cache and resetting IP settings can help resolve connectivity issues.

  • Press the Windows key + X and select “Windows PowerShell (Admin).”
  • Type “ipconfig /flushdns” and press Enter.
  • Type “ipconfig /release” and press Enter.
  • Type “ipconfig /renew” and press Enter.

Set a static IP address

Setting a static IP address can help resolve IP conflicts and improve connectivity.

  • Open “Network Connections” as described earlier.
  • Right-click on your Wi-Fi connection and select “Properties.”
  • Double-click on “Internet Protocol Version 4 (TCP/IPv4).”
  • Choose “Use the following IP address” and enter the required information.
  • Click “OK” to save your changes.

Disable IPv6

Disabling IPv6 can help resolve compatibility issues with older routers and modems.

  • Open “Network Connections” and right-click on your Wi-Fi connection.
  • Select “Properties” and uncheck “Internet Protocol Version 6 (TCP/IPv6).”
  • Click “OK” to save your changes.
  • Update router firmware
Network Configuration Fixes

Outdated router firmware can cause connectivity issues. Check your router’s manufacturer’s website for firmware updates and follow their instructions to install the update.


4. Advanced Fixes

Reset Winsock settings

Winsock is a Windows networking component that helps manage internet connections. Resetting Winsock settings can help resolve connectivity issues.

  • Press the Windows key + X and select “Windows PowerShell (Admin).”
  • Type “netsh winsock reset” and press Enter.
  • Restart your computer for the changes to take effect.

Reset the TCP/IP stack

Resetting the TCP/IP stack can help fix configuration issues that cause connectivity problems.

  • Open “Windows PowerShell (Admin)” as described earlier.
  • Type “netsh int ip reset” and press Enter.
  • Restart your computer for the changes to take effect.

Check for Windows updates

Outdated Windows software can cause connectivity issues. Check for updates and install them to ensure your system is up-to-date.

  • Click on the Start button and select “Settings.”
  • Choose “Update & Security.”
  • Click on “Check for updates” and install any available updates.

Disable the Fast Startup feature

Fast Startup can cause issues with network connections. Disabling it may help resolve the problem.

  • Press the Windows key + X and select “Power Options.”
  • Click on “Choose what the power buttons do.”
  • Click on “Change settings that are currently unavailable.”
  • Uncheck “Turn on fast startup (recommended)” and click “Save changes.”

Perform a network reset in Windows 10

A network reset can help resolve persistent connectivity issues by reinstalling network devices and resetting network settings to their defaults.

  • Click on the Start button and select “Settings.”
  • Choose “Network & Internet.”
  • Scroll down and click on “Network reset.”
  • Click “Reset now” and confirm the action.
  • Restart your computer for the changes to take effect.

Conclusion

In this article, we discussed 15 fixes to help you resolve the Wi-Fi connected no internet issue in Windows 10, ranging from basic troubleshooting steps to advanced solutions. These fixes included restarting your computer and network devices, updating drivers and firmware, adjusting network settings, and resetting networking components. We encourage you to try these fixes in the order presented to resolve the Wi-Fi connected no internet issue. Each fix addresses different aspects of the problem, and one or a combination of them should help you regain internet access. If the issue persists after trying all 15 fixes, it may be time to seek professional help. Contact your device manufacturer, internet service provider, or a local technician for further assistance, as there could be hardware or more complex issues that require expert attention.

Photo of author

Benjamin Johnson

Hey there, I'm Ben, the tech-savvy Founder and CEO of WinFixo.com. I've dedicated my life to helping fellow Windows users optimize their PCs for peak performance. Join me on this journey as we unlock the full potential of your Windows devices together!

Leave a Comment